HW-01 • COUPLER STUD$1.90
Pommel Joiner Stud
Loading 3D model...
Dual-Threaded Center Coupler
Double-ended center sleeve that screws two hilt grip sleeves together into a balanced dual-bladed saber with a continuous hollow core.
$1.90USD
Print-ready STL file with modular screw threadsProduct Specifications
Screw Threads
| Location | Type | Thread |
|---|---|---|
| Top shoulder 8.4 mm clocked male thread for hilt half A | male | M26×3.0 |
| Bottom shoulder 8.4 mm clocked male thread for hilt half B | male | M26×3.0 |
Hollow Core & Cavities
- Internal wire pass-through bore
- Ø16.6 mm
Measured Dimensions
- Nominal body height
- 16.0 mm
- Body height (3D model)
- 16.0 mm
- Overall height incl. thread
- 32.8 mm
- Max outer diameter
- Ø45.0 mm
3D Printing
- Print orientation
- Upright on lower male thread end (Z-up, 0 support)
- Slicer supports
- None required (self-supporting)
- Scale
- Full size (mm)
- Male thread length
- 8.4 mm
- Thread clearance options
- 0.15 / 0.25 / 0.35 mm
- Threads directly into two hilt grip sleeves with clocked stops at 0° to create an aligned dual-bladed saber.
Universal Compatibility
Every SaberCraft part uses the same modular screw thread system, so this piece twists smoothly onto any compatible hilt section you print—now or on future builds.