SaberCraft custom saber logo
SABERCRAFT
Loading 3D model...
Choke Neck

Wayfarer Stepped Neck

Stepped isolator neck with 45° flared compression shoulders, dual rubberized rings, and side strut reliefs.

The Wayfarer Stepped Neck bridges emitter and extension sections with cleanly bevelled 45-degree compression shoulders, dual recessed accent bands, and four perimeter rib struts. Prints upright directly on the build plate with integrated M26x3.0 threads and zero slicer supports.

$1.90USD
Print-ready STL file with modular screw threads
Customize in 3D StudioAll parts in this category

Product Specifications

Screw Threads

LocationTypeThread
Top
8.4 mm male thread
maleM26×3.0
Bottom
Female socket
femaleM26×3.0

Hollow Core & Cavities

Pass-through bore
Ø16.6 mm

Measured Dimensions

Nominal body height
36.0 mm
Body height (3D model)
36.1 mm
Overall height incl. thread
44.4 mm
Max outer diameter
Ø42.8 mm

3D Printing

Print orientation
Upright on bottom mating plane (Z-up)
Slicer supports
None required (self-supporting)
Scale
Full size (mm)
Male thread length
8.4 mm
Thread clearance options
0.15 / 0.25 / 0.35 mm

Universal Compatibility

Every SaberCraft part uses the same modular screw thread system, so this piece twists smoothly onto any compatible hilt section you print—now or on future builds.

More parts in this category